Roofing

Roofing Safety Tips

DIY roofing can be a great way to save money on a project. You’ll get a certain fulfillment by allowing yourself to be hands on. However, you need to ensure that your safety is a priority. If you don’t make the necessary considerations to get everything on board, you could cause an accident. That’s why it’s very important that you think of a proper procedure to get things done in a orderly manner, and be absolutely careful if you do decide to go up there to complete a task. Here are some tips to help you in the process.

General Roof Safety

Good safety measures actually start well before you get on the roof. Remember, you need to make the transition from the ground to the top of your home. Look for things like power lines or more of a safety access route in order to get things situated. Now, that you’ve done that, get on the roof and go through a couple of these procedures to help you make it easier up there.

First of all, make sure you have a clean work area away from your pets and kids.

Also, be sure that you work on a dry surface, so that you aren’t more susceptible to slipping. Another thing you should do is not work on it during extreme cold or heat. Your shingles can be damaged a lot more, and cause them from sealing or tying properly.

Soft-soled shoes help for the best traction while on the roof. If you want to take things up a notch, you can always add a harness and ropes with the right roof anchor to feel safer up there. Next, we’ll talk about why having good a ladder and using it correctly will keep you more secure.

Good Ladder Safety

You can never be too secure in using a ladder. One of the first things you should do is looking at all the warning labels and making sure that it isn’t damaged. It’s also important that if you decide to use a metal ladder, you keep away from any power lines, because the material is a good conductor for electricity. Pay attention to your position on the ladder. A good rule of thumb is having 3 point contact, which is 2 feet and one hand, or two hands and one foot.

Make sure the ground or surface you put the ladder on is completely stable. You never want it to be shaky, because of the risk of falling. Make sure that the ladder is locked-in properly, especially when you have to extend it. If you need to make any adjustments to the height, do it before someone stands on it. Always be proactive when it comes to being around electricity.

Make Sure You’re Safe Around Electricity

Of course, you want to avoid being around any power lines. If you can, hire a utility company to help adjust things so that it’s safer to do your job on the roof. If a power line is near where you need your ladder, try to substitute a metal one for a wood or fiberglass alternative. This way, it won’t be a good conductor of electricity. Additionally, avoid using your hands or equipment around any hot wires. When you begin putting tiles down, it’s important to safely use your nail gun.

Use Your Nail Gun Properly

It’s very risky using a nail gun. However, proper use will help to restore your roof greatly. First of all, never point a nail gun at someone. Also, make sure that the safety mechanism is in proper place. Hold it correctly and only pull the trigger on the business end when you have it firmly pressed again the material you intend to hold down. To ensure that everything is working well, inspect, clean, and lubricate your nail gun before each and every use. Next, you want to handle materials carefully.

Handling Materials

At the end of the day, you want to handle everything in a way that prevents injury. If you’re lifting heavy materials, always remember to lift with your legs. Pace yourself so that you don’t fatigue easily. If you need to climb up a ladder while carrying materials, be reasonable in the amount you hold in your hand. Additionally, any material you plan to use should be catered to the type of roof on your house.

These are just a few safety tips to help you not only be secure while on the roof, but help you restore it in the right manner.